ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
General ApplicationsGeneral ApplicationsMunicipal fire departmentsIndustrial fire brigadesShipboard fire fightingConstructionConstructionDouble-jacket construction: Jafline® HD™ is an all polyester double-jacket hose with an EPDM rubber ozone resistant lining.Service Temperature RangeService Tempera..
General ApplicationsGeneral ApplicationsMunicipal fire departmentsIndustrial fire brigadesShipboard fire fightingConstructionConstructionDouble-jacket construction: Jafline® HD™ is an all polyester double-jacket hose with an EPDM rubber ozone resistant lining.Service Temperature RangeService Tempera..
ApplicationsGeneral ApplicationsDesigned for low pressure/high volume nozzlesAvailable as 1 3/4" attack line and 2 1/2" master flow lineConstructionConstructionComposed of an outer jacket woven from 100% high tenacity synthetic yarn and an inner liner consisting of a one-piece extruded through-the-w..
MODEL #VB3012 1-1/2" FIREFIGHTING SHUT OFF VALVE
This 1-1/2" valve has a 1-1/2" female swivel inlet and a 1-1/2" male threaded tip
This valve is constructed of hard anodize..
MODEL #SBV15SS
1 1/2" Swivel F. X 1 1/2" M. Ball Shutoff Valve with 1" Waterway
1 1/2" NST or 1 1/2" NPSH available
Constructed of hard anodized aluminum
Quality polymer ball and seat/seal mechanisms
Shutoff handles are either available in cast aluminum or composit..
MODEL # VB9520
1 1/2" Swivel F. X 1 1/2" M. Ball Shutoff Valve with 1 3/8" Waterway
1 1/2" NST & 1 1/2" NPSH available
Constructed of hard anodized aluminum
Quality polymer ball and seat/seal mechanisms
Shutoff handles are either available in cast aluminum..
MODEL# VB9520 NPG
1 1/2" Swivel F. X 1 1/2" M. Ball Shutoff Valve with 1 3/8" Waterway
1 1/2" NST and 1 1/2" NPSH available
Constructed of hard anodized aluminum
Quality polymer ball and seat/seal mechanisms
Shutoff handles are either available in cast alumin..
MODEL #FGP6-15 NPSH - 6 Inch Class A Foam Proportioner and Two 12" Sticks of Foam
Make Class A Foam instantly
Fits 1 1/2" NPSH hose lines
Shown with shutoff and nozzle tip - not included - SB-FGP-6-15
Comes with two Class A 12" solid foam sticks - break..
MODEL #FGP 6-15 NST - 6 Inch Class A Foam Proportioner and Two 12" Sticks of Foam
Make Class A Foam instantly
Fits 1 1/2" NH (NST) hose lines
Shown with shutoff and nozzle tip - not included - SB-FGP-6-15
Comes with two Class A 12" solid foam sticks - break ..
MODEL #FGP12-15 NPSH
For 12” or smaller hard cartridge foam sticks
Comes with 2 Class "A" 12" Foam cartridges
Anodized Aluminum Construction
1.5” Rigid Fe. X 1.5” M. NPSH
CLICK HERE FOR Product Literature
&n..
MODEL #FGP12-15 NST
For 12” or smaller hard cartridge foam sticks
Comes with 2 Class "A" 12" Foam cartridges
One 12" stick can produce approximately 400 gallons of a foam solution
Anodized Aluminum Construction
1.5” Rigid ..
MODEL # STBR1 1/16 NPSHAvailable in 1 1/2” NPSH inlet1 1/16" OutletConstructed of hard anodized aluminumProudly Made in the USACLICK HERE FOR Product LiteratureSMOOTH BORE THEORETICAL FLOW DATA/ GPMPSI3/16"1/4"3/8"1/2"5/8"3/4"7/8"15/16"1"1 1/16"1 1/8"1 1/4"406.51127487310714316618921223929..
MODEL #VB15/10
1 1/2" Swivel F. X 1" M. Ball Shutoff Valve with 1" Waterway
1" NST & 1" NPSH available
Constructed of hard anodized aluminum
Quality polymer ball and seat/seal mechanisms
Shutoff handles are either available in cast aluminum or composite m..
MODEL #VB1560 1" Shut Off Valve with Pistol Grip
This firefighting valve has a 1" Female swiveled inlet and a 1" threaded tip
The valve body is built from hard a..
MODEL #FGP12-1 NPSH
For 12” or smaller hard cartridge foam sticks
Comes with 2 Class "A" 12" Foam cartridges
One 12" stick can produce approximately 400 gallons of a foam solution
Anodized Aluminum Construction
1” Rigid Fe.  ..
MODEL #FGP12-1 NST
For 12” or smaller hard cartridge foam sticks
Comes with 2 Class "A" 12" Foam cartridges
One 12" stick can produce approximately 400 gallons of a foam solution
Anodized Aluminum Construction
1” Rigid Fe. &..
MODEL #FGP6-1 NST - 6" Class A Foam Proportioner and Two Sticks of Foam
Make Class A Foam instantly
Fits 1" NH (NST) hose lines
Shown with shutoff and nozzle tip - not included - SB-FGP-6-1
Comes with 2 Class "A" 12" Foam cartridges - break the stick in half to fi..
MODEL #FGP 6-1 NPSH - 6" Class A Foam Proportioner and Two Sticks of Foam
Maintenance free Class A Foam
Fits 1" NPSH hose lines and nozzle tips
Shown with shutoff and nozzle tip - not included - SB-FGP-6-1
Comes with two 12" Class A Foam cartridges - break t..
MODEL #VB10/15
1" Swivel F. X 1 1/2" M. Ball Shutoff Valve with 1" Waterway
Constructed of hard anodized aluminum
Quality polymer ball and seat/seal mechanisms
Shutoff handles are either available in cast aluminum or composite material
Pistol grip can be removed easily
Can..
MODEL #SG12250NPG
1 1/2" NST or 1 1/2" NPSH available
4 gallonage selection ring, 125, 150, 200, 250, without pattern change
Flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Constant f..
MODEL #SG12250
1 1/2" NST or 1 1/2" NPSH available
4 gallonage selection ring, 125, 150, 200, 250, without pattern change
Flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Constant flow..
MODEL #SG12250 2 1/2NPG
2 1/2" NST only
4 gallonage selection ring, 125, 150, 200, 250, without pattern change
Flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Constant flow through Fo..
MODEL #SG12250 2 1/2
2 1/2" NST only
4 gallonage selection ring, 125, 150, 200, 250, without pattern change
Flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Constant flow through Fog t..
MODEL # ST5016-PV
1 1/2" NST or 1 1/2" NPSH available
125 gpm Constant Flow
Can be used as a Break Apart
BIMATIC system allows flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
F..
MODEL # ST5016 2 1/2-PV
2 1/2" NST only
125 gpm Constant Flow
Can be used as a Break Apart
BIMATIC system allows flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Fog, Straight Stream, and..
MODEL #BYPP9520
125 GPM Bypass Eductor
1 1/2" NH Inlet
Comes with a 3% and a 6% metering disc-1% disc available-just ask
39" clear pickup tube comes standard on this eductor
On average, our eductors use 15% less pump pressure than the other guys
CLICK HERE FOR Fo..
MODEL #BYPP9520-DIAL
125 GPM VIPER Bypass Eductor
1 1/2" NH Inlet
Comes with the C&S Metering Dial capable of .5%, 1%, 3%, or 6% foam with a turn of the dial
Comes with a 48" clear pickup hose
The bypass switch allows you to keep the eductor inline when you do not want foam...
MODEL #SG1560NPG
1" NST or 1" NPSH available
4 gallonage selection ring, 15, 30, 50, 60, without pattern change
Flush without shutting down
Constructed of E-LITE aluminum with brass internal parts
Compact, Simple, Low maintenance, Light-weight
Constant flow..